MSP6729 generator speed probe is magnetoelectricity speed sensor based on the principle of electromagnetic induction to achieve speed, in front of the sensor with coils, when the gear rotates, the change in the sensor coil magnetic field lines produce periodic voltage in the sensor coil, through the process of the voltage count, can measure the rotational speed of gear. The outer shell of the sensor is made of stainless steel. The output signal is strong, the anti-interference performance is good, the installation and use are convenient, and it can be used in the harsh environment such as smoke, oil, gas and water vapor. And the price is very high.

Product performance and characteristics:

1, can be replaced, but the basic functions are similar.

2, instead of all MSP sensors, the difference between the thread and the opening, but the basic functions are similar.

3, prominent features: can be used in smoke, oil, gas, water and other harsh environment.

4, selling point: output signal is strong, anti-interference performance is good.

Specification parameter:

1 、 working voltage range: 4 ~ 24 V

2, the current is: 2 A

3, output waveform: sine wave approximation (more than 50r/min)

4, the output signal amplitude: 50r/min = 300mV (sensor core and the measured tooth gap between 8 = 0.5 ~ 1.2mm measured gear modulus M = 2 Z = 60 electrical steel gear material)

5, measuring range: 50 ~ 5000Hz

6, the use of time: continuous use

7, working environment: temperature -20 to +60 degrees, -20 ~ +160 degrees centigrade (special custom made)

8, output form: two wire system

9, size: outer diameter M16 * 1 * 117mm

11, weight: About 120g (excluding output wire)

MSP 6729, 3/8UNF, L=, 69mm

Other types of sensors and parameters are provided below:
ItemPickupLengthThreadLengthLeadLengthThreadSizeDrillSize
MSP6753.125 "(79) 2.75" (70) 7 "(178) 5/8-18UNF-2A37/64
MSP6765.0 "(127) 4.625" (118) 12 "(305) 5/8-18UNF-2A37/64
MSP6773.125 "(79) 2.75" (70) 4.25 "(108) 5/8-18UNF-2A37/64
MSP6785.00 "(127) 4.75" (121) 6.125 "(156) 5/8-18UNF-2A37/64
MSP6793.125 "(79) 2.75" (70) 4.25 "(108) 5/8-18UNF-2A37/64
MSP67105.00 "(127) 4.75" (121) 6.125 "(156) 5/8-18UNF-2A37/64
MSP67143.125 "(60) 2.875" (73) 4.25 "(108) M16*1.514mm
MSP67153.125 "(79) 2.875" (73) 4.25 "(108) M16*1.514mm
MSP67192.375 "(60) 2" (51) 6 "(152) 5/8-18UNF-2A37/64
MSP67203.875 "(98) 3.50" (89) 4.50 "(114) 5/8-18UNF-2A37/64
MSP67292.70 "(69) 2.25" (57) 72 "(1829) 3/8-24UNF-2A.332
MSP67301.70 "(43) 1.25" (32) 72 "(1829) 3/8-24UNF-2A.332
MSP67314.0 "(102) 3.55" (90) 72 "(1829) 3/8-24UNF-2A.332